Transducer Accessories

Trolling Motor Mount - 4/8-PinEasily attach your compatible 4- or 8-pin scanning transducer to the trolling motor of your boat with this mount. Its low-profile design provides ultimate protection from underwater obstructions and easy mounting.WARNING:...

MHX MXNT Transom Mount Hardware f/MEGA TransducerStainless Steel mounting hardware for the XNT transom mount transducers.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth...

AD MTM Trolling Motor Adapter for MEGA Transom TransducerThis hardware kit adapts our MEGA transom mount transducer for use on the trolling motor. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California...

TotalScan/StructureScan 3D Replacement BracketReplacement bracket for TotalScan & StructureScan 3D Transom Mount TransducersHardware included Specifications:Type: Mounting BracketsBox Dimensions: 4"H x 5"W x 13"L WT: 0.8 lbsUPC:...

Adapter 7-Pin Blue Transducer to a 9-Pin Black UnitFeatures:Connects legacy 7-Pin Blue Transducer to a 9-Pin Black UnitSonic Connector Transducer Adapter CableCompatible With:HDS Gen3Elite-Ti SeriesNSS evo2GO XSE SeriesSonarHub™...

Adapter Cable for CPT-70 and CPT-80 TransducersThis Raymarine adapter cable is required when hooking up a CPT-70 and CPT-80 transducer to a Dragonfly unit with a green locking collar. Specifications:Type: AdaptersBox Dimensions: 1"H x 6"W x...

A80328 Adapter CableProduct Compatibility: Single B75/B175 Operation Cable Specifications:Type: AdaptersBox Dimensions: 2"H x 9"W x 12"L WT: 0.4 lbsUPC: 723193796351

Transducer Extension Cable for CP470/CP570 Wide CHIRP Transducers - 10MFeatures:Speed, Depth and Temperature10MSpecifically for Raymarine's CP470 and CP570 Wide CHIRP Transducers Specifications:Type: ExtensionBox Dimensions: 3"H x 8"W x...

Transducer Adapter Cable f/P72, P79, GT15 & GT30 for echoMAP™ CHIRPConnect a Garmin GT30 transom mount scanning transducer and a Garmin GT15M-IH, Airmar P72 or Airmar P79 in-hull mount traditional transducer to a compatible echoMAP™ CHIRP...

Dual Transducer Extension 10' Cable - 12-Pin - for StructureScan 3DDual 10' - 12-Pin Transducer Cables Specifications:Type: MiscBox Dimensions: 5"H x 7"W x 7"L WT: 1.35 lbsUPC: 9420024148563

Flat Mount Bracket f/StructureScan 3D Ducer & TotalScan Ducer3D Transducer Flush Mount Bracket is used to flush mount the transducer under the boats Hull. Suits TotalScan and 3D Transom Transducers Specifications:Type: MiscBox Dimensions: 1"H x...

Deadrise Angle Finder - Accuracy of ± 1/2°Accurate to 1/2 of 1°, this precision instrument, with strong ceramic magnet is designed for attachment to a carpenter's square or straight edge to overcome time consuming computation of angles...

15' Extension Cable - 8-PinSI-TEX Extension CableFeatures:15'8-Pin Specifications:Type: ExtensionBox Dimensions: 1"H x 8"W x 8"L WT: 0.5 lbsUPC: 010407330723

MHX XNPT Portable Hardware KitMounting hardware and suction cup for portable XNT transducers. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other...

Transducer Spray ShieldGarmin's transducer spray shield is available for Garmin side scanning transducers.Mounting hardware included.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth...

Extension Cable with XID - 12-Pin - 30'Extend the cable length of your compatible 12-pin transducer with this 30 foot (9 meter) cable. Supports 12-pin Airmar transducer with XID.WARNING: This product can expose you to chemicals which are known to the...

Extension Cable with XID - 12-Pin - 10'Extend the cable length of your compatible 12-pin transducer with this 10 foot (3 meter) cable. Supports 12-pin Airmar transducers with XID.WARNING: This product can expose you to chemicals which are known to the...

CPT-DV/CPT-DVS Mounting KitTransom Mount Bracket for CPT-DV & CPT-DVS Specifications:Type: Mounting BracketsBox Dimensions: 2"H x 6"W x 8"L WT: 0.2 lbsUPC: 723193795842

Bare Wire Transducer to 12-Pin Sounder Wire Block AdapterConnect a compatible bare wire transducer to a Garmin 12-pin sounder connector with this wire block adapter.Compatible Devices:GPSMAP® 7607xsv, 7608xsv, 7610xsv, 7612xsv & 7616xsvGSD™ 25...

4m Extension Cable f/CPT-DV & DVS Transducer & Dragonfly 4, 5 & Wi-FishUse Raymarine's 4m cable to extend the length of the standard cable provided with Dragonfly CPT-DV and DVS transducers. Specifications:Type: ExtensionBox Dimensions: 1"H x...

164WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel...

60WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel...

117WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel...

164WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They...

60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They...

117WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They...

175WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164WR-2 or 164WR-3 for the hull nut.For use...

75WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. Use wrench 75WR-2 or 75WR-3 for the hull nut.For use with:B75SS75...