Steering Systems

HYCO 1.1T Front Mount OB Tilt Steering up to 150HPThe Hyco 1.1T With Tilt Hydraulic Steering Kit is all you need for a complete steering system. This system is used on all engines up to 150HP or less. If engine H/P exceeds 150 then the Protech packaged...

T4 Through Tilt Tube Electro Steer - SaltwaterA unique product to steer a kicker motor. Can be installed on any kicker motor that has a treaded tilt tube. No need to drill holes in your transom. Installs in minutes. 9″ minimum needed between main...

El Outboard Steering Kit for Up To 150HP Motors401 Manual Helm with Fitting KitThe heart of the Admiral Series is the HyDrive M402 helm unit. The 7-piston pumps are precision manufactured to standards and tolerances that are second to none. In-built...

Stainless Steel Tube & Rod for Up To 150HP Up To 150HP OutboardSpecifications:Cylinder Tube = Stainless SteelCylinder Tube Dia. = 1.33 InchesCylinder Rod = Stainless SteelCylinder Brackets = Stainless SteelCylinder 1 " Nylok Nuts = Stainless...

N-8 - 49' Nylon Tube 3/8"Features:Semi-Rigid Nylon Tube at 3/8 Inch OD (49' Coil, You Cut to length to suit)Use with HP Compression Olive and Nut FittingsSupplied in HY EL O/B KIT

Bleed KitUsed to top up the Hydrive hydraulic fluid in a system by pouring it into the top of the helm unit.Suits: 101, 102, 401, 402, 500, and 501 Hydrive helm units. (These are usually found on the Hydrive Admiral and Commander range of kits). It does...

401 Manual Helm with Fitting KitThe heart of the Admiral Series is the HyDrive M402 helm unit. The 7-piston pumps are precision manufactured to standards and tolerances that are second to none. In-built lock valves, which eliminate torque feedback are...

PROTECH 3.1 Front Mount OB Hydraulic System - Includes UP28 FM Helm, Oil & UC128-TS/3 Cylinder - No HosesDurability and performance define the Protech front mount outboard steering package. From the stainless steel helm shaft, heavy-duty shaft...

UC128 Version 1 Hydraulic CylinderCompatible with competing helms, hoses, and oil, the UC128 cylinder is built to last with heavy-duty stainless steel cylinder rods, seals, and link assemblies. Constructed of top-grade materials this cylinder is simple...

PROTECH 1.1 Front Mount OB Hydraulic System - Includes UP28 FM Helm, Oil & UC128-TS/1 Cylinder - No HosesDurability and performance define the Protech front mount outboard steering package. From the stainless steel helm shaft, heavy duty shaft...

HYCO 1.1 Front Mount OB System up to 175HP - Includes UP20 FM Helm, 2qts of Oil, UC95-OBF CylinderFeaturing the unique split tilt tube rod that allows for installation of the UC94 cylinder without removing the engine, the Hyco is an easy and affordable...

MD32T with Tilt MasterDrive Retrofit Kit Steering SystemFeatures:Eliminates torque at the steering wheelThree different selectable levels of power give the boater the desired feeling on the wheelAutomatically reverts to manual mode in case of power...

Hydraulic Hose Kit 6' - PairTwo high pressure flexible hoses, with pre-crimped fittings and bend restrictors on both ends.Fittings: ORFS*Not recommended for use with SilverSteer™ Series cylinders.

Hydraulic Hose Kit 4' - PairTwo high pressure flexible hoses, with pre-crimped fittings and bend restrictors on both ends.Fittings: ORFS*Not recommended for use with SilverSteer™ Series cylinders.

Motor Well Boot - 5-1/2" Black accordion style seal organizes and protects engine control cables, wires or fuel lines. UV stabilized molded rubber. Includes mounting ring.

Steering Cable Boot Durable molded rubber boot protects the output end of all standard steering cables keeping dirt, debris and moisture out extending the service life of the cable. Includes two cable tie style clamps. WARNING: This product can...

SS Steering Wheel Maneuvering Knob Sea-Dog® Steering Wheel Maneuvering Knob fits our Sea-Dog® Steering Wheels (230111, 230212, 230115, 230211, 230215, 230313, and 230315). A steering knob attaches to the wheel for use in situations where...

Yamaha 150-200 Zero Torque Feedback TillerThe four stroke outboard engines are generating high torque loads which can make tiller steered boats difficult to steer. The Uflex® ZTF Tiller systems eliminate propeller torque at the tiller handle when...

Yamaha 90-115 Zero Torque Feedback TillerThe four stroke outboard engines are generating high torque loads which can make tiller steered boats difficult to steer. The Uflex® ZTF Tiller systems eliminate propeller torque at the tiller handle when the...

Stainless Throttle HandleUpgrade your older Edson controls with these stainless replacements. Highly polished, marked “Fast-Slow”. Can be easily retrofitted onto existing Edson engine controls. Includes mounting screw.IMPORTANT: These...

Stainless Clutch HandleUpgrade your older Edson controls with these stainless replacements. Highly polished, marked “Fwd-Rev”. Can be easily retrofitted onto existing Edson engine controls. Includes mounting screw.IMPORTANT: *These...

Horizontal Rail Accessory Mount - 5" DiskEdson’s Stainless Horizontal Rail Accessory Mount puts your hand-held GPS securely and conveniently within reach on your Steering Pedestal Guard. With its 5" Disk Platform you can mount your GPS hand held...

Horizontal Rail Accessory Mount - 3" DiskEdson’s Stainless Horizontal Rail Accessory Mount puts your hand-held GPS securely and conveniently within reach on your Steering Pedestal Guard. With its 3" Disk Platform you can mount your GPS hand...

Stainless Steel Wheel Nut - 1"-14 Shaft ThreadsAttention to detail is the keynote of these Edson Wheel Nuts. Highly polished Investment Cast 316 Stainless has superior strength as well as good looks. Measure your steering shaft thread for the...

Brake Maintenance KitJust like your car, your boat’s wheel brake needs periodic relining. This kit includes all you need to make your brake work like new again.Kit Includes:(2) Bronze Brake Legs with Brake Pads(1) Cotter Pin(1) Stainless Steel...

Stainless Steel Pedestal Guard Mounting Feet - PairEdson Pedestal Guard Mounting Feet are available in pairs as a direct replacement for Edson’s black plastic feet. Gasket and bushing allow for mounting 1”, 1-1/8” or 1-1/4” guard...

UP28R Rear Mount Helm 1.7 cu. 3/4" Tapered Stainless Steel ShaftFeatures:Available in four different displacement sizesCompact designBall bearing piston raceBuilt-in lock valve for positive rudder lockIntegral relief valve for over-pressure...

Power Extension Y-Cable - 33'Y-Cable for Power A Mark II

Hydraulic Steering Fluid - QuartFeatures:Applications: All Hydraulic Steering SystemsType: ISO 15 Low Temp Mineral Hydraulic FluidSelect Container Size: Quart

Double Paddle Trim SystemDouble paddle kit including two paddles and the brackets to attach it to a tilt or to a front mount helm.For complete control of engine trim and tilt, trim tabs, jackplates, PowerPole(R) and other on board systems, the...