Vehicle Storage & Cargo

Normally used on trailer winch stands. This roller acts as a bow stop for the boat. C.H. Yates rollers are made of solid, high grade black rubber.

Side mount hinge fittings are designed to mount vertically and attach an eye end in Bimini top applications. UV stabilized injection molded nylon construction. Installs with #10 FH fasteners (not included). 1/4” pin size. Side mount hinge fittings...

All Carver Bimini Top Canvas orders include: Bimini Top fabric and storage boot in matching fabric, instructions for installation, 100% acrylic marine-grade binding, center bow adjustment straps for adjusting crown and a limited warranty. The heavy duty...

UV stabilized injection molded nylon top fittings connect to tubing and creates an attachment point as part of a Bimini top system. Top fittings function as a pivot point for your canvas top. Available as a top cap or insert for 3/4” or 7/8” round tubing...

Trimax Locks exclusive internal O-ring and watertight cap seal out moisture. The round key wont bend or break like flat keys and are impossible to pick. Triple plated chrome finish.

One of the best rollers on the market! These polyurethane rollers will not put any marks on your boat. They are designed to outlast ordinary rubber, absorb shocks and resist cuts. Fits 5 inch wide bracket, 5/8 inch shaft.

Mount tail lights high and dry. Includes galvanized steel brackets and hardware for mounting to pre-punched boat guide-on upright posts. Lights sold separately.

Designed for use with marine and utility trailers. Refer to manufacturer recommendations and installation guidelines to ensure a proper fit. Installation is quick and easy.

Complete with two tail lights, two amber clearance/side marker lights with reflex lens. Comes with 20' or 25' trailer wiring harness cable with molded 4-flat prong plug, and 4' four wire car wiring harness cable with molded 4-flat plug plus license plate...

Gator Tuff Zinc Transom Tie-Downs include a self-tightening easy-lock over the center buckle. Features 2 inch wide weatherproof polypropylene webbing. Constructed with heavy gauge zinc plated hardware. Hook and loop pad to secure loose ends and protect...

Panel bracket assembly is composed of quality, marine-grade materials. Formed galvanized steel to fit keel rollers. Comes in a size of 1/2 in. wide. Slots with non-slip notches. Accept 1/2 inch or 5/8 in. shaft.

The Bargman Round Adhesive-Mount Reflector is a Class "A" acrylic reflector that is hermetically sealed. Each features a center mounting hole. Diameter measures 3-3/16". Includes a limited 1 year warranty from the manufacturer.

The 305CRPN 30A 125V locking blade male shore power plug features corrosion resistant contacts and terminals. The body is made of yellow nylon with a ribbed design for secure grip. Made from quality parts.

The WirthCo Trailer Test Light helps to properly install a 4-way connector without a trailer attached, plugging directly into the existing car connector. Designed with precision construction for optimal performance and reliability. Quick and easy to use.

WirthCo Complete Trailer Connectors feature both male and female ends for an easy trailer connection. The wires are color-coded for easy identification. The connector length is 12". Includes 3-way flat connectors at both ends.

The Bargman 6-Way Super Sealed Car End is a prewired, 6-way car end sealed with 7 feet of UL listed 6-way cable (White, Blue and Red-10 gauge; Yellow, Brown and Green-14 gauge). It features solid brass terminals in a housing of industrial-strength,...

Heavy duty 6-way die cast connector with rugged Cycolac interiors. Unique cable clamp gives more support and helps save installation time. Concealed terminal socket design, stainless steel spring. Unit is dust and water resistant. Has proven its...

Heavy duty plated steel brackets. Features reinforcing beads or flanges for strength. The Black plated model can blend in with the black connector and black hitch for clean consistent finish. Combination brackets have a black, powder coat finish and are...

The most popular coupler mechanism ever developed, the Fas-Lok originated as a Fulton brand and is offered in a full line of SAE Class I through IV rated straight tongue stamped couplers. The Fas-Lok latching mechanism allows quick and easy trailer...

The most popular coupler mechanism ever developed, the Fas-Lok originated as a Fulton brand and is offered in a full line of SAE Class I through IV rated straight tongue stamped couplers. The Fas-Lok latching mechanism allows quick and easy trailer...

Designed for use with marine and utility trailers, Fulton brand tongue jacks are time-tested and application-proven. Our bolt-on versions include all necessary mounting hardware. For weld-on versions include all necessary mounting hardware. For weld-on...

Solid steel hitch balls engineered to meet all safety requirements of VESC regulation V-5. Cold forged for superior strength. Zinc-plated finish for excellent corrosion resistance. 1-7/8" Ball x 3/4" Shank Diameter x 2-3/8" Shank Length. 2,000 lbs. GTW...

Stainless steel interchangeable ball shank has a 1" diameter and 2-1/4" length. 10,000 lb. gross trailer weight. Superior corrosion resistance. Works with Convert-A-Ball 1-7/8" and 2" interchangeable balls.

Stainless steel 1-7/8" ball. Increase the versatility of your Convert-A-Ball set or use this ball as a replacement. Superior corrosion resistance. Made from quality materials.

Stainless steel interchangeable ball shank has a 1" diameter and 2-1/4" length. 10,000 lb. gross trailer weight. Corrosion and rust resistant. Includes shank and two balls (1-7/8", and 2").

Solid steel hitch balls engineered to meet all safety requirements of VESC regulation V-5. Cold forged for superior strength. Torque ball to 450 ft. lbs. Includes a limited lifetime warranty.

Replacement reducer bushings designed for all trailer hitch ball mounts. Reduces a 1 inch hitch ball hole to a 3/4 inch hole. Features a bright zinc plated finish. Built with quality materials to withstand harsh RV and marine environments.

Designed for use with marine and utility trailers, Fulton brand tongue jacks are time-tested and application-proven. Our bolt-on versions include all necessary mounting hardware. For weld-on versions include all necessary mounting hardware. For weld-on...

This hitch ball has a chrome finish and dimensions of 2-5/16" Ball x 1" x 2-1/8". Solid steel hitch balls are engineered to meet all safety requirements of VESC regulation V-5 and cold forged for superior strength. When installing hitch balls, torque all...

This hitch ball has a chrome finish and dimensions of 2" Ball x 3/4" x 1-1/2". Solid steel hitch balls are engineered to meet all safety requirements of VESC regulation V-5 and cold forged for superior strength. When installing hitch balls, torque all...