Watercraft Steering Parts & Cables

This package consists of: E22166 P70 control E70096 EV-1 Sensor Core E70098 ACU-100 Q047 Tiller Drive R70160 Evolution Cabling Kit The NEW Raymarine p70 and p70R Autopilot Control Heads   The new autopilots are available in two control styles...

Raymarine Evolution ACU Specifications Model  ACU-100   ACU-200   ACU-300   ACU-400     E70098 E70099 E70139 E70100     Drive Current Output  Maximum continuous 7 A at supply voltage ...

Raymarine Evolution ACU Specifications Model  ACU-100   ACU-200   ACU-300   ACU-400     E70098 E70099 E70139 E70100     Drive Current Output  Maximum continuous 7 A at supply voltage ...

The standard cable length on Raymarine's transducers for A series and C/E series with built in sonar is 33-feet (10-meters). This extension cable will add an additional 9.8 feet (3 meters) to the transducer cable. Note:  For optimal...

Replacement wheel drive unit for ST4000+ and newer versions of Raymarine?s wheel pilot systems. The fully enclosed wheel-drive fits most types of wheel and makes for a simple installation and superb autopilot performance. Maximum recommended laded boat...

1 INCH TILLER BRACKET Allows for horizontal mounting of the tiller pilot when the boat's tiller is higher or lower than the fixed end of the tiller drive.

Raymarine Wireless Hub AerialExtension for Ray90/91Model: A80541Wireless Hub with 5-meter interconnect cableMounting hardwareInstallation guide and documentation kitCut the cord and enjoy wireless freedom onboard your vessel! The Wireless Expansion Hub...

Lowrance 3m, 10ft, extension cable Model: 000-12752-001 3m, 10ft, extension cable for use with StructureScan 3D transducers.

Lowrance Outboard Pilot Cable-Steer Pack Available for HDS Gen2 Keypad units only (*available Q2 for HDS Gen2 Touch and HDS Gen3) Model: 000-11749-001 UPC: 9420024134320 Steer your outboard motor to a heading, waypoint, route or cursor, with control from...

Lowrance Outboard Pilot Hydraulic Pack Available for HDS Gen2 Keypad units only (*available Q2 for HDS Gen2 Touch and HDS Gen3) Model: 000-11748-001 UPC: 9420024134313 Steer your outboard motor to a heading, waypoint, route or cursor, with control from...

Garmin 12 Meter Network Cable, Small ConnectorsModel: 010-12528-0212 Meter network cable with small connectors.

Garmin 6 Meter Network Cable, Small ConnectorsModel: 010-12528-016 Meter network cable with small connectors.

Garmin 2 Meter Network Cable, Small ConnectorsModel: 010-12528-002 Meter network cable with small connectors.

Garmin Fist Microphone 10 Meter Extension CableModel: 0101252303Give yourself a little room when using your compatible VHF radio with this 12-pin fist mic extension cable. Available in 3-meter (10-feet) and 10-meter (33-feet) lengths.

Garmin Fist Microphone 3 Meter Extension CableModel: 0101252300Give yourself a little room when using your compatible VHF radio with this 12-pin fist mic extension cable. Available in 3-meter (10-feet) and 10-meter (33-feet) lengths.

Garmin HDMI Cable (GPSMAP® 8400/8600)Model: 010-12390-20Connect your GPSMAP 8400 or 8600 series chartplotter to an high definition external video source, up to 1080p. The water resistant and secure connection allows you to watch a full HD video feed...

Garmin is pleased to announce the new Class B Compact Drive Unit for the GHP 12 marine autopilot. The Class B Compact Drive Unit works with the GHP 12 Marine Autopilot System to control your sailboat's steering system. This device is designed for use...

Help your GRF 10 rudder feedback sensor reach your GHP 12™ or GHP 20 by adding 15 m to your cable.

Help your GRF 10 rudder feedback sensor reach your GHP 12™ or GHP 20 by adding 5 m to your cable.

Pair this sensor with the GHP 12™ or GHP20 SmartPump system to provide rudder position feedback and to detect and avoid rudder stops while sailing or boating. The GRF 10 uses a magnetic sensor to relay position information, eliminating friction...

Garmin 30 foot transducer extension cable For 12-pin XID transducers Model: 010-11617-42 UPC: 753759142834 Extend the cable length of your compatible 12-pin transducer with this 30 feet cable. Supports 12-pin Airmar transducers with XID.

Garmin 10 foot transducer extension cable For 12-pin XID transducers Model: 010-11617-32 UPC: 753759142827 Extend the cable length of your compatible 12-pin transducer with this 10 feet (3 meters) cable. Supports 12-pin Airmar transducers with XID.

Use this 10 ft (3 m) extension cable to connect your 4-pin transducer to your sonar unit.

Linear drive unit for GHP-12 corepack. For sailboats with up to 79,000 lbs of displacement The Class B Drive Unit works with the GHP 12 Marine Autopilot System to control your sailboat's steering system. This device is designed for use with larger...

The Class A Drive Unit works with the GHP 12 Marine Autopilot System to control your sailboat's steering system. This device is designed for use with larger sailboats with up to 28,500 lbs (12,927 kg) of displacement. Drive Unit Type: Hydraulic...

5 meter extension cable for GHP20 CCU.

Our 5 meter extension cable for your GHP10™ is the perfect accessory for mounting the CCU further than 3 meters from the ECU.

The PUMPHRP17-12 is a reversing pumpset designed to interface the NavPilot series autopilot with a hydraulic steering system. The pump assembly incorporates a reversible gerotor gear pump, a two -piece gear housed in an eccentric ring. This allows for...

Use this color display as a a second station to Furuno's popular 700 series autopilots.

Furuno 33-203 13' 10 Pin Extension CableModel: AIR33203Furuno 33-203 13' 10 Pin Extension CableSpecificationsManufacturer Part NumberAIR-33-203