{"title":"Xanigo Marine","description":"","products":[{"product_id":"xanigo-marine-mold-mildew-stain-remover-16oz-xmrm16","title":"Xanigo Marine Mold  Mildew Stain Remover - 16oz [XMRM16]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMold \u0026amp; Mildew Stain Remover - 16oz\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSay goodbye to stubborn mold and mildew stains with Xanigo Marine’s Mold \u0026amp; Mildew Stain Remover! This powerful formula is easy to use and is the perfect solution for removing mold and mildew stains from boat tops, vinyl cushions, chairs, canopies, and more. Its versatile formula can also be used on rubber fenders, fiberglass, caulk, tile, grout, shower stalls, sinks, counters, and other surfaces that may be prone to mold and mildew.\u003c\/p\u003e\u003cp\u003eSimply spray the product onto a cool substrate, let it soak for a few minutes, and watch the mold and mildew disappear. To ensure the best results, avoid using it in direct sunlight.\u003c\/p\u003e\u003cp\u003eAfter removing it, make sure to PREVENT the mold from coming back with Xanigo Marine’s Mold \u0026amp; Mildew Preventer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBottle Size: 16 ounces\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSTEP 1: Remove Mold \u0026amp; Mildew with Xanigo Marine's Mold \u0026amp; Mildew Stain Remover\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eXanigo Marin’s Mold \u0026amp; Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold \u0026amp; Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSTEP 2: Neutralize the Remover\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSTEP 3: Prevent Mold \u0026amp; Mildew with Xanigo Marine's Mold \u0026amp; Mildew Preventer\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.\u003c\/p\u003e\u003cp\u003eSpray the Mold \u0026amp; Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSTEP 4: Maintain Seats with Xanigo Marine's Waterless Wash\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold \u0026amp; mildew preventer.\u003c\/p\u003e\u003cp\u003eAlso, a great way to shine up a gel coat quickly!\u003c\/p\u003e \u003c!--- cis2:m2lulpxs ---\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: Mildew \u0026amp; Moisture\u003c\/li\u003e\n\u003cli\u003eBox Dimensions: 3\"H x 3\"W x 8\"L WT: 1.2 lbs\u003c\/li\u003e\n\u003cli\u003eUPC: 860007772771\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/104285QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cstyle\u003e.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\u003c\/style\u003e\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/e_9jwdjH-lA?si=hzfeItrMiPTHu3l0\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003cstyle\u003e.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\u003c\/style\u003e\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/C7Sxy638OGA?si=rBln61734cpeWyU7\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e","brand":"Xanigo Marine","offers":[{"title":"Default Title","offer_id":57944075501871,"sku":"XMRM16-XAN","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/8607\/0831\/files\/104285XL.jpg?v=1778777638"},{"product_id":"xanigo-marine-mold-mildew-preventer-1qt-xmmmp32","title":"Xanigo Marine Mold  Mildew Preventer - 1qt [XMMMP32]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMarine Mold \u0026amp; Mildew Preventer - 1qt\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSay goodbye to mold and mildew on the boat! The Xanigo Marine Mold \u0026amp; Mildew Solution is here to save the day. This will prevent and protect unsightly mold and mildew on vinyl boat seats, life jackets, canvas, bumpers, carpet, and any other areas with high moisture.\u003c\/p\u003e\u003cp\u003eSimply spray the Mold \u0026amp; Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber towel. That's it! With just one application, the boat will be protected against mold and mildew for up to 90 days.\u003c\/p\u003e\u003cp\u003eNeed help removing the mold first? Check out Xanigo Marine's Mold \u0026amp; Mildew Stain Remover! \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLong-lasting residual protection\u003c\/li\u003e\n\u003cli\u003eWorld's only patented organosilane compound, which provides greater protection\u003c\/li\u003e\n\u003cli\u003eNo alcohol and non-flammable\u003c\/li\u003e\n\u003cli\u003eWater-based (only water-based organosilane)\u003c\/li\u003e\n\u003cli\u003eLong shelf life\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBottle Size: 32 ounces\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThe Complete Process to Treat and Prevent Mold \u0026amp; Mildew on Vinyl Boat Seats\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSTEP 1: Remove Mold \u0026amp; Mildew with Xanigo Marine's Mold \u0026amp; Mildew Stain Remover\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eXanigo Marin’s Mold \u0026amp; Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold \u0026amp; Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSTEP 2: Neutralize the Remover\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSTEP 3: Prevent Mold \u0026amp; Mildew with Xanigo Marine's Mold \u0026amp; Mildew Preventer\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.\u003c\/p\u003e\u003cp\u003eSpray the Mold \u0026amp; Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSTEP 4: Maintain Seats with Xanigo Marine's Waterless Wash\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold \u0026amp; mildew preventer.\u003c\/p\u003e\u003cp\u003eAlso, a great way to shine up a gel coat quickly!\u003c\/p\u003e \u003c!--- cis2:m2lulpxs ---\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: Mildew \u0026amp; Moisture\u003c\/li\u003e\n\u003cli\u003eBox Dimensions: 4\"H x 4\"W x 10\"L WT: 2.25 lbs\u003c\/li\u003e\n\u003cli\u003eUPC: 860007772702\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/104288QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cstyle\u003e.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\u003c\/style\u003e\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/67s2fESab0A?si=8BQRJh3ZRVqU2ytY\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003cstyle\u003e.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\u003c\/style\u003e\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/C7Sxy638OGA?si=rBln61734cpeWyU7\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e","brand":"Xanigo Marine","offers":[{"title":"Default Title","offer_id":57944075534639,"sku":"XMMMP32-XAN","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/8607\/0831\/files\/104288XL.jpg?v=1778777639"},{"product_id":"xanigo-marine-professional-formula-rust-remover-16oz-xmrr16","title":"Xanigo Marine Professional Formula Rust Remover - 16oz [XMRR16]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProfessional Formula Rust Remover - 16oz\u003c\/strong\u003e\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eCorrosion happens. When it does, it is not forever. Our Professional Formula rust remover is designed to eliminate rust stains. When combined with our Corrosion Inhibitor, you can establish a protocol to reduce rust stains and ongoing corrosion.\u003c\/p\u003e\u003cp\u003eXanigo Marine Rust Remover is a concentrated, acid-based cleaning solution formulated to dissolve iron oxide (rust) and mineral-based corrosion from compatible surfaces. The formulation combines fast-acting acidic components with wetting and penetration agents to ensure e cient rust removal, even on heavily oxidized areas. The product is designed for professional and industrial use where controlled, effective corrosion removal is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRecommended Uses:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRust and corrosion removal\u003c\/li\u003e\n\u003cli\u003eIron oxide staining elimination\u003c\/li\u003e\n\u003cli\u003eSurface preparation before compounding\u003c\/li\u003e\n\u003cli\u003eIndustrial, automotive, marine, and maintenance applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePerformance Characteristics:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli id=\"isPasted\"\u003eRapid rust dissolution\u003c\/li\u003e\n\u003cli\u003eEffective at room temperature\u003c\/li\u003e\n\u003cli\u003ePenetrates porous corrosion layers\u003c\/li\u003e\n\u003cli\u003eMinimal residue when properly rinsed\u003c\/li\u003e\n\u003cli\u003eControlled foaming for vertical surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSafe On:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBase steel and iron\u003c\/li\u003e\n\u003cli\u003eCarbon steel\u003c\/li\u003e\n\u003cli\u003eFerrous metal components\u003c\/li\u003e\n\u003cli\u003eGel coat\u003c\/li\u003e\n\u003cli\u003ePaint\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNot Recommended For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli id=\"isPasted\"\u003eProlonged exposure to aluminum and stainless steel\u003c\/li\u003e\n\u003cli\u003eAnodized metals\u003c\/li\u003e\n\u003cli\u003eNatural stone (marble, limestone, travertine)\u003c\/li\u003e\n\u003cli\u003eDecorative or soft metal finishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*Always test on an inconspicuous area prior to full application\u003c\/p\u003e \u003c!--- cis2:m2lulpxs ---\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: Hard Water\u003c\/li\u003e\n\u003cli\u003eBox Dimensions: 3\"H x 6\"W x 11\"L WT: 1.4 lbs\u003c\/li\u003e\n\u003cli\u003eUPC: 860012752553\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/113511QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e","brand":"Xanigo Marine","offers":[{"title":"Default Title","offer_id":57954662220079,"sku":"XMRR16-XAN","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/8607\/0831\/files\/113511XL.jpg?v=1779102863"},{"product_id":"xanigo-marine-mold-mildew-preventer-1-gallon-xmmmp1g","title":"Xanigo Marine Mold  Mildew Preventer - 1 Gallon [XMMMP1G]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMold \u0026amp; Mildew Preventer - 1 Gallon\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSay goodbye to mold and mildew on the boat! The Xanigo Marine Mold \u0026amp; Mildew Solution is here to save the day. This will prevent and protect unsightly mold and mildew on vinyl boat seats, life jackets, canvas, bumpers, carpet, and any other areas with high moisture.\u003c\/p\u003e\u003cp\u003eSimply spray the Mold \u0026amp; Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber towel. That's it! With just one application, the boat will be protected against mold and mildew for up to 90 days.\u003c\/p\u003e\u003cp\u003eNeed help removing the mold first? Check out Xanigo Marine's Mold \u0026amp; Mildew Stain Remover! \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLong-lasting residual protection\u003c\/li\u003e\n\u003cli\u003eWorld's only patented organosilane compound, which provides greater protection\u003c\/li\u003e\n\u003cli\u003eNo alcohol and non-flammable\u003c\/li\u003e\n\u003cli\u003eWater-based (only water-based organosilane)\u003c\/li\u003e\n\u003cli\u003eLong shelf life of 1.5 years unopened, 1 year opened\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBottle Size: 32 ounces\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThe Complete Process to Treat and Prevent Mold \u0026amp; Mildew on Vinyl Boat Seats\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSTEP 1: Remove Mold \u0026amp; Mildew with Xanigo Marine's Mold \u0026amp; Mildew Stain Remover\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eXanigo Marin’s Mold \u0026amp; Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold \u0026amp; Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSTEP 2: Neutralize the Remover\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSTEP 3: Prevent Mold \u0026amp; Mildew with Xanigo Marine's Mold \u0026amp; Mildew Preventer\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.\u003c\/p\u003e\u003cp\u003eSpray the Mold \u0026amp; Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSTEP 4: Maintain Seats with Xanigo Marine's Waterless Wash\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold \u0026amp; mildew preventer.\u003c\/p\u003e\u003cp\u003eAlso, a great way to shine up a gel coat quickly!\u003c\/p\u003e \u003c!--- cis2:m2lulpxs ---\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: Mildew \u0026amp; Moisture\u003c\/li\u003e\n\u003cli\u003eBox Dimensions: 6\"H x 6\"W x 12\"L WT: 8.6 lbs\u003c\/li\u003e\n\u003cli\u003eUPC: 860007772719\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/104290QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cstyle\u003e.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\u003c\/style\u003e\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/67s2fESab0A?si=8BQRJh3ZRVqU2ytY\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003cstyle\u003e.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\u003c\/style\u003e\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/C7Sxy638OGA?si=rBln61734cpeWyU7\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e","brand":"Xanigo Marine","offers":[{"title":"Default Title","offer_id":57960467923247,"sku":"XMMMP1G-XAN","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/8607\/0831\/files\/104290XL.jpg?v=1779232633"},{"product_id":"xanigo-marine-shore-power-cord-rub-rail-cleaner-1-gallon-xmspc1g","title":"Xanigo Marine Shore Power Cord  Rub Rail Cleaner - 1 Gallon [XMSPC1G]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShore Power Cord \u0026amp; Rub Rail Cleaner - 1 Gallon\u003c\/strong\u003e\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eEnsure your boat is always in pristine condition with Xanigo Marine's Shore Power Cord \u0026amp; Rub Rail Cleaner. This powerful, bio-based solution is designed to clean and restore your shore power cords and rub rails with ease. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstructions for Use:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpray a small amount in an inconspicuous area to test compatibility.\u003c\/li\u003e\n\u003cli\u003eSpray the cleaner on the surface of the cord or rub rail and let it sit for 30 seconds.\u003c\/li\u003e\n\u003cli\u003eUse the abrasive mitt(sold separately), placing the cord in the palm of the mitt.\u003c\/li\u003e\n\u003cli\u003eWrap your mitted hand around the cord or use the mitt flat on rub rails.\u003c\/li\u003e\n\u003cli\u003eClean with a back-and-forth motion and watch as your cord and rub rail return to a like-new condition.\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lulpxs ---\u003e","brand":"Xanigo Marine","offers":[{"title":"Default Title","offer_id":58088384299311,"sku":"XMSPC1G-XAN","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/8607\/0831\/files\/105387XL.jpg?v=1781820031"},{"product_id":"xanigo-marine-shore-power-cord-rub-rail-cleaner-32oz-xmspc32","title":"Xanigo Marine Shore Power Cord  Rub Rail Cleaner - 32oz [XMSPC32]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShore Power Cord \u0026amp; Rub Rail Cleaner - 32oz\u003c\/strong\u003e\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eEnsure your boat is always in pristine condition with Xanigo Marine's Shore Power Cord \u0026amp; Rub Rail Cleaner. This powerful, bio-based solution is designed to clean and restore your shore power cords and rub rails with ease.  Perfect for routine maintenance to prevent problems before they start.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstructions for Use:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e1. Spray a small amount in an inconspicuous area to test compatibility.\u003c\/p\u003e\u003cp\u003e2. Spray the cleaner on the surface of the cord or rub rail and let it sit for 30 seconds.\u003c\/p\u003e\u003cp\u003e3. Use the abrasive mitt, placing the cord in the palm of the mitt.\u003c\/p\u003e\u003cp\u003e4. Wrap your mitted hand around the cord or use the mitt flat on rub rails.\u003c\/p\u003e\u003cp\u003e5. Clean with a back-and-forth motion and watch as your cord and rub rail return to a like-new condition.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lulpxs ---\u003e","brand":"Xanigo Marine","offers":[{"title":"Default Title","offer_id":58088384332079,"sku":"XMSPC32-XAN","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/8607\/0831\/files\/108269XL.jpg?v=1781820032"},{"product_id":"xanigo-marine-abrasive-cleaning-mitt-xmam1","title":"Xanigo Marine Abrasive Cleaning Mitt [XMAM1]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbrasive Cleaning Mitt\u003c\/strong\u003e\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eSay goodbye to stubborn grime, dirt, and marine buildup with the Xanigo Marine Abrasive Cleaning Mitt. Designed for tough cleaning jobs, this heavy-duty mitt makes removing dirt from shore power cords, rub rails, fenders, bumpers, tires, and more effortless. *Not recommended for use on vinyl seats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBuilt for Tough Jobs – The heavy-duty abrasive surface cuts through grime and buildup without damaging surfaces.\u003c\/li\u003e\n\u003cli\u003eProtect Your Hands – The waterproof, chemical-resistant glove keeps your hands clean and dry while scrubbing.\u003c\/li\u003e\n\u003cli\u003eVersatile \u0026amp; Durable – Perfect for boaters, RV owners, and outdoor enthusiasts who need a reliable cleaning tool.\u003c\/li\u003e\n\u003cli\u003eEasy to Use – Just spray your preferred cleaner, scrub with the mitt, and rinse—no more struggling with stuck-on messes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTackle tough stains and marine grime with confidence—add the Xanigo Marine Abrasive Cleaning Mitt to your detailing kit today!\u003c\/p\u003e\u003cp\u003e*Not recommended for use on vinyl seats.\u003c\/p\u003e \u003c!--- cis2:m2lulpxs ---\u003e","brand":"Xanigo Marine","offers":[{"title":"Default Title","offer_id":58088384364847,"sku":"XMAM1-XAN","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/8607\/0831\/files\/108270XL.jpg?v=1781820032"},{"product_id":"xanigo-marine-mold-mildew-stain-remover-32oz-xmrm32","title":"Xanigo Marine Mold  Mildew Stain Remover - 32oz [XMRM32]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMold \u0026amp; Mildew Stain Remover - 32oz\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSay goodbye to stubborn mold and mildew stains with Xanigo Marine’s Mold \u0026amp; Mildew Stain Remover! This powerful formula is easy to use and is the perfect solution for removing mold and mildew stains from boat tops, vinyl cushions, chairs, canopies, and more. Its versatile formula can also be used on rubber fenders, fiberglass, caulk, tile, grout, shower stalls, sinks, counters, and other surfaces that may be prone to mold and mildew.\u003c\/p\u003e\u003cp\u003eSimply spray the product onto a cool substrate, let it soak for a few minutes, and watch the mold and mildew disappear. To ensure the best results, avoid using it in direct sunlight.\u003c\/p\u003e\u003cp\u003eAfter removing it, make sure to PREVENT the mold from coming back with Xanigo Marine’s Mold \u0026amp; Mildew Preventer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBottle Size: 32 ounces\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSTEP 1: Remove Mold \u0026amp; Mildew with Xanigo Marine's Mold \u0026amp; Mildew Stain Remover\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eXanigo Marin’s Mold \u0026amp; Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold \u0026amp; Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSTEP 2: Neutralize the Remover\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSTEP 3: Prevent Mold \u0026amp; Mildew with Xanigo Marine's Mold \u0026amp; Mildew Preventer\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.\u003c\/p\u003e\u003cp\u003eSpray the Mold \u0026amp; Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSTEP 4: Maintain Seats with Xanigo Marine's Waterless Wash\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold \u0026amp; mildew preventer.\u003c\/p\u003e\u003cp\u003eAlso, a great way to shine up a gel coat quickly!\u003c\/p\u003e \u003c!--- cis2:m2lulpxs ---\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: Mildew \u0026amp; Moisture\u003c\/li\u003e\n\u003cli\u003eBox Dimensions: 4\"H x 4\"W x 10\"L WT: 2.5 lbs\u003c\/li\u003e\n\u003cli\u003eUPC: 860007772788\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/104286QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cstyle\u003e.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\u003c\/style\u003e\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/e_9jwdjH-lA?si=hzfeItrMiPTHu3l0\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003cstyle\u003e.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\u003c\/style\u003e\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/C7Sxy638OGA?si=rBln61734cpeWyU7\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e","brand":"Xanigo Marine","offers":[{"title":"Default Title","offer_id":58098647531823,"sku":"XMRM32-XAN","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/8607\/0831\/files\/104286XL.jpg?v=1782177798"},{"product_id":"xanigo-marine-waterless-wash-fabric-refresher-1qt-xmap32","title":"Xanigo Marine Waterless Wash  Fabric Refresher - 1qt [XMAP32]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWaterless Wash \u0026amp; Fabric Refresher - 1qt\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Xanigo Marine Waterless Wash is the perfect way to keep the boat clean between Xanigo Marine Mold \u0026amp; Mildew Preventer applications without the use of harsh chemicals or wasting water. No hose or running water is needed!\u003c\/p\u003e\u003cp\u003eProtect investments by protecting against mold and mildew on seats, life jackets, vinyl, canvas, ropes, carpets, and other areas with high moisture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBottle Size: 1 quart\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThe Complete Process to Treat and Prevent Mold \u0026amp; Mildew on Vinyl Boat Seats\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSTEP 1: Remove Mold \u0026amp; Mildew with Xanigo Marine's Mold \u0026amp; Mildew Stain Remover\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eXanigo Marin’s Mold \u0026amp; Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold \u0026amp; Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSTEP 2: Neutralize the Remover\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSTEP 3: Prevent Mold \u0026amp; Mildew with Xanigo Marine's Mold \u0026amp; Mildew Preventer\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.\u003c\/p\u003e\u003cp\u003eSpray the Mold \u0026amp; Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSTEP 4: Maintain Seats with Xanigo Marine's Waterless Wash\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold \u0026amp; mildew preventer.\u003c\/p\u003e\u003cp\u003eAlso, a great way to shine up a gel coat quickly!\u003c\/p\u003e \u003c!--- cis2:m2lulpxs ---\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: Washes\u003c\/li\u003e\n\u003cli\u003eBox Dimensions: 3\"H x 3\"W x 10\"L WT: 2.3 lbs\u003c\/li\u003e\n\u003cli\u003eUPC: 860007772740\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/104287QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/brochure\/104287BR.pdf\" target=\"_blank\"\u003eBrochure (pdf)\u003c\/a\u003e\u003cstyle\u003e.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\u003c\/style\u003e\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/67s2fESab0A?si=L0wJFMcoRbAPJA63\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e","brand":"Xanigo Marine","offers":[{"title":"Default Title","offer_id":58098647564591,"sku":"XMAP32-XAN","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/8607\/0831\/files\/104287XL.jpg?v=1782177798"}],"url":"https:\/\/stock4less.com\/en-eu\/collections\/xanigo-marine.oembed","provider":"Stock4Less.com","version":"1.0","type":"link"}