Steering Systems

Union T-Fitting f/3/8" Tube Compression Hose FittingsUnion T-Fitting for 3/8" TubeTypical Applications: T-Fitting for 3 standard 3/8" compression thread hose fittings Specifications:3/8 COMP FITTING ALL Sides = 9/16 - 24 UNEF 2A

Tee Fitting with Bleed Nipple for IB & Stern Drive CylindersBleed fitting for all inboard and stern drive cylinders.Specifications:1/4 NPT to 3/8 COMP FITTINGCylinder Side = 1/4 NPTHose Side = 9/16 - 24 UNEF 2A

Straight Helm Fitting 1/4 NPT for UP Comp Line & Autopilot Return LineFitting for the compensating line in the UP series helms or autopilot return line.Specifications:1/4 NPT to 3/8 COMP FITTINGHelm Side = 1/4 NPTHose Side = 9/16 - 24 UNEF 2A

Complete Boss Fitting Typical Application:Bleed fitting for all outboard cylindersSpecifications:ORB, Size #6 to 3/8 COMP FITTINGCylinder Side = 9/16 - 18 UNF 2AHose Side = 9/16 - 24 UNEF 2A

HYCO 1.1T Front Mount OB Tilt Steering up to 150HPThe Hyco 1.1T With Tilt Hydraulic Steering Kit is all you need for a complete steering system. This system is used on all engines up to 150HP or less. If engine H/P exceeds 150 then the Protech packaged...

PROTECH 3.1 Front Mount OB Hydraulic System - Includes UP28 FM Helm, Oil & UC128-TS/3 Cylinder - No HosesDurability and performance define the Protech front mount outboard steering package. From the stainless steel helm shaft, heavy-duty shaft...

PROTECH 2.1 Front Mount OB Hydraulic System - Includes UP28 FM Helm, Oil & UC128-TS/2 Cylinder - No HosesDurability and performance define the Protech front mount outboard steering package. From the stainless steel helm shaft, heavy duty shaft...

PROTECH 1.1 Front Mount OB Hydraulic System - Includes UP28 FM Helm, Oil & UC128-TS/1 Cylinder - No HosesDurability and performance define the Protech front mount outboard steering package. From the stainless steel helm shaft, heavy duty shaft...

MD32T with Tilt MasterDrive Retrofit Kit Steering SystemFeatures:Eliminates torque at the steering wheelThree different selectable levels of power give the boater the desired feeling on the wheelAutomatically reverts to manual mode in case of power...

Hydraulic Hose Kit 6' - PairTwo high pressure flexible hoses, with pre-crimped fittings and bend restrictors on both ends.Fittings: ORFS*Not recommended for use with SilverSteer™ Series cylinders.

Hydraulic Hose Kit 4' - PairTwo high pressure flexible hoses, with pre-crimped fittings and bend restrictors on both ends.Fittings: ORFS*Not recommended for use with SilverSteer™ Series cylinders.

Hydraulic Hose Kit 2' - PairTwo high pressure flexible hoses, with pre-crimped fittings and bend restrictors on both ends.Fittings: ORFS*Not recommended for use with SilverSteer™ Series cylinders.

Yamaha 150-200 Zero Torque Feedback TillerThe four stroke outboard engines are generating high torque loads which can make tiller steered boats difficult to steer. The Uflex® ZTF Tiller systems eliminate propeller torque at the tiller handle when...

Yamaha 90-115 Zero Torque Feedback TillerThe four stroke outboard engines are generating high torque loads which can make tiller steered boats difficult to steer. The Uflex® ZTF Tiller systems eliminate propeller torque at the tiller handle when the...

UP28R Rear Mount Helm 1.7 cu. 3/4" Tapered Stainless Steel ShaftFeatures:Available in four different displacement sizesCompact designBall bearing piston raceBuilt-in lock valve for positive rudder lockIntegral relief valve for over-pressure...

Power Extension Y-Cable - 33'Y-Cable for Power A Mark II

Wireless RemoteFor adding a second pendant, or to replace originalCan be paired in field with existing receiverIncludes 2x AA Batteries Specifications:Type: PartsBox Dimensions: 2"H x 6"W x 7"L WT: 0.6 lbsUPC: 628309263348Brochure (pdf)

Type A Controller f/Boats with an Existing AutopliotNo need for additional drive units. The Intellisteer Wireless Controller is designed to be wired between a Course Computer and Autopilot DriveWhen the Intellisteer Wireless Controller is activated it...

Type H for Boats with Hydraulic SteeringFeatures:Connects to any hydraulic steering systemRugged Octopus hydraulic pumpAdds pushbutton steering to your hydraulic steeringCurrent 3-6A Typical, 15A PeakIncludes all hoses and fittingsWireless control...

Type R for Cable Steered Boats with Auxiliary OutboardsFeatures:Drive connects to kickerElectronic clutch disengages for manual steeringRotary drive systemSafety override technologyCurrent 1.25A typical, 5A peak6' steering cable for connecting drive...

Type T for Helms with Tilt Function for Cable Steered Boats with Dash Mounted WheelFeatures:Replaces existing helmElectronic clutch disengages for manual steeringRotary drive systemFits behind dashSafety override technologyCurrent 1.25A Typical, 5A...

Type S for Straight Shaft Helms for Cable Steered Boats with Dash Mounted WheelFeatures:Replaces existing helmElectronic clutch disengages for manual steeringRotary drive systemFits behind dashSafety override technologyCurrent 1.25A Typical, 5A...

Male Run T-Fitting - 3/8" x 3/8" Tube x 1/4" NPTTypical Application:Used to connect any 1/4 NPT Female port to our hosesSpecifications:1/4 NPT to 3/8 COMP FITTINGHelm side = 1/4 NPTHose side= 9/16 - 24 UNEF 2A

Nylon Tubing 3/8" OD - 50'Nylon tubing for Packaged Steering Systems up to 150hp

UC128TS / UC128-SVS Tilt Tube RodTilt tube rod for UC128TS / UC128-SVS Cylinder

UC128OBF Mounting HardwareMounting hardware for UC128TS Cylinder

UC128TS / UC128-SVS Tiller Bolt KitTiller Bolt Kit for UC128TS / UC128-SVS Cylinder

UC94 Tilt Tube RodTilt tube rod for UC94 Cylinder

UC94 Mounting HardwareMounting hardware for UC94 Cylinder

UC94 Tiller Bolt KitTiller bolt kit for UC94 Cylinder